|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Bezels||Bi-directional Rotating Time-Lapse||Bi-directional Rotating||Fixed||Fixed|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
Band Material: 316L. The band is the most important part of the watch. 316L steel is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Watch Case: 316L. The case is the most important part of the watch. 316L is suitable for daily seawater corrosion, and 316L steel is sufficient.
Case Back: Solid. In the world of watches, a sturdy back cover is very important, and the water resistance will be better than a transparent one. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. A good sapphire mirror can block moisture and dust, protect the hands, dial and movement. Tips: The A Replica is applied with mineral glass instead of sapphire.
Second Markers: Minute Markers around the outer rim. The second mark on the watch is also called the clock hand. This design element has been used in many famous designs such as watches, clocks and other objects.
Dial Markers: luminous dot. When you are not under light, the luminous point will light up.
Luminiscence: Hands and Markers. As you can see in the pictures above, the luminescence of the watch is hands and markers. With this watch, you will not waste time to check the real-time.
Bezel Material: Stainless Steel. The watch uses a high-end stainless steel bezel, which made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Fold Over Clasp. Our watch uses a folding buckle strap, to make it easier and faster for the user to open and fold the watch case to keep it secure.
Water Resistance: 30 meters. About the watreproof depth of the watch, it is 30 meters, which is similar as real watch. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. The watch is a very important device in everyone’s life. The watch has a indicate date to measure time, the minute dial is used to estimate the current time, and the stop dial is used to estimate the time after the interval.
There are no reviews yet.